Symantec
™
Endpoint Detection and Response 4.5 Installation Guide for the S550
appliance
5. Optionally, to extend the appliance from the rack:
a) Press the blue rack levers up to disengage the slide rail safety locks.
b) While continuing to press the levers, gently pull or push the appliance so it extends out the front or rear of the rack.
c) Remove pressure from the levers immediately so the rail safety locks engage in the fully-extended out position.
Take care not to push or pull too far, especially while pressing the blue levers. Doing so could cause the appliance
to fall from the rack.
d) While continuing to press the levers, carefully slide the appliance out the front or rear of the rack. Make sure to use
two persons or a mechanical aid to lift the appliance from the rack.
6. Reconnect the cables and verify the appliance is functioning.
Connecting the cables
Powering on the S550 appliance and verifying the LEDs
32
To Next Page
Loading...