Broan QP342SS - User Manual

BR N
QP3 SERIES
EVOLUTION TM 3
l Register your product online
at: www.broan.com
Page 1
WARNING
FOR DOMESTIC
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN=
JURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only inthe manner intended by the manufacturer.
If you have questions, contact the manufacturer at the ad-
dress or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a qual-
ified person(s) in accordance with all applicable codes and
standards, including fire-rated construction.
4. Sufficient air is needed for proper combustion and exhaust-
ing of gases through the flue (chimney) of fuel burning equip-
ment to prevent backdrafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society of Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code au-
thorities.
5. This product may have sharp edges. Be careful to avoid cuts
and abrasions during installation and cleaning.
6. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
7. Ducted fans must always be vented to the outdoors.
8. Use only metal ductwork.
9. Do not use this fan with any solid-state speed control device.
10.As an alternative, this product may be installed with the UL-
approved cord kit designated for the product, following in-
structions packed with the cord kit.
11.This unit must be grounded.
TO REDUCE THE RISK OFA RANGETOP GREASE FIRE:
1. Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that may ig-
nite. Heat oils slowly on low or medium settings.
2. Always turn hood ON when cooking at high heat or when
flamb6ing food (i.e. Cr_pes Suzette, Cherries Jubilee, Pep-
percorn Beef Flamb6).
3. Clean ventilating fans frequently. Grease should not be al-
lowed to accumulate on fan or filter.
4. Use proper pan size. Always use cookware appropriate for the
size of the surface element.
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE
EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE
FOLLOWING:*
1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or
metal tray, then turn off the burner. BE CAREFUL TO PRE-
VENT BURNS. If the flames do not go out immediately,
EVACUATE AND CALLTHE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN --You may be burned or
spread the fire.
3. DO NOT USE WATER, including wet dishcloths or towels - a
violent steam explosion will result.
4. Use an extinguisher ONLY if:
A. You know you have a Class ABC extinguisher, and you
already know how to operate it.
B. The fire is small and contained in the area where it started.
C. The fire department is being called.
D. You can fight the fire with your back to an exit.
* Based on "Kitchen Firesafety Tips" published by NFPA.
CAUTION
1. For indoor use only.
2. For general ventilating use only. Do not use to exhaust haz-
ardous or explosive materials and vapors.
3. To avoid motor bearing damage and noisy and/or unbal-
anced impeller, keep drywall spray, construction dust, etc.,
off power unit.
4. Do not use over cooking equipment greater than 60,000
BTU/hr. as the blower motor will shut down intermittently.
5. Your hood motor has a thermal overload which will automati-
cally shut off the motor if it becomes overheated. The motor
will restart when it cools down. If the motor continues to shut
off and restart, have the hood serviced.
6. The top of the hood MUST NOT BE LESS than 24" and at a
maximum of 30" above cooktop for best capture of cooking
impurities.
7. This hood is not intended to be used as a shelf.
8. Please read specification label on product for further infor-
mation and requirements.
[_lf hood is to be installed non-ducted:
Purchase a set of (2) non-ducted filters for 30" wide
hoods (Model BPPF30) & 36" wide hoods (Model
BPPF36) or a set of (3) non-ducted filters for 42" wide
hoods (Model BPPF42) from your local distributor or
retailer and attach them to the aluminum mesh filters.
Installer: Leave this manual
with the homeowner.
Homeowner: Cleaning, Maintenance and
Operating instructions on pages 2-4.

Summary

Safety and Warning Instructions

Fire, Electric Shock, and Injury Prevention

Instructions to reduce risk of fire, electric shock, or personal injury.

Grease Fire Prevention and Safety

Steps to prevent injury during a range top grease fire.

General Operational Cautions

Cautions for indoor use, hazardous materials, motor protection, and installation guidelines.

Operating the Range Hood

Light and Fan Control Operations

Explains the 3-push-button operation for light and fan settings.

Delay Off and Timer Features

How to activate and use the 10-minute delay off and timer functions.

Accessing Feature Menu

Guide to accessing and adjusting various hood settings via the feature menu.

Feature Menu Customization

Clock and Display Settings

How to set the clock and toggle the LED display on or off.

Sleep Mode and Light Sensor

Enabling sleep mode and adjusting ambient light sensor sensitivity.

Heat Sentry System

Heat Sentry System Functionality

How the system monitors temperature and adjusts fan speed automatically.

Fuse Management

Fuse Identification and Replacement

Locates fuses on the control board and specifies replacement fuse details.

Optional Accessories and Maintenance

Make-Up Air Damper Connection

How to connect the optional make-up air damper to the hood.

Remote Control Compatibility

Mentions compatibility with Broan RF Remote Control Model BCR1.

Cleaning Grease Filters

Instructions for cleaning grease filters, including dishwasher safety.

Non-ducted Filter Maintenance

Guidance on changing non-ducted filters and the 'Clean Sense' feature.

Light Bulb Replacement Guide

Bulb Type and Installation Procedure

Details the type of halogen bulbs and how to install them using the provided tool.

Installation: Preparing Hood Location

Ductwork and Electrical Cutout Planning

Diagrams for placing ductwork and electrical cutouts for different ducting types.

Installation: Ductwork Setup

Duct Run Optimization

Advises on choosing a straight, short duct run for optimal performance.

Ductwork Connection and Sealing

Instructions for installing wall/roof cap and connecting ductwork sections.

Installation: Measurement and Hood Prep

Minimum Hood to Cooking Surface Distance

Specifies the required minimum distance above the cooking surface.

Hood Preparation Steps

Instructions for removing parts bag, polyfilm, filters, bottom pan, and connector.

Installation: Non-Ducted Configuration

Non-Ducted Diverter and Plate Installation

Steps to attach diverter and install non-duct plate.

Non-Ducted Filter Installation

Guidance on purchasing and attaching non-ducted filters to mesh filters.

Installation: Ducted Configuration

Knockout Plate Removal for Ducting

Instructions to remove specific knockout plates for chosen ducting method.

Damper;Duct Connector or Round Plate Attachment

How to attach the appropriate connector or plate over the opening.

Installation: Mounting the Hood

Electrical Knockout and Cover Removal

Instructions for removing the electrical wiring box cover and knockout.

Hood Mounting and Securing

How to run power cable and hang the hood using mounting screws.

Electrical Wiring Connection

Connecting House Power Cable

How to connect the house power cable to the hood wiring (black, white, ground).

Filter Re-installation

Re-installing aluminum filters or installing non-ducted filters.

Service Parts and Warranty

Service Parts Identification

Lists part numbers and descriptions for replacement components.

One Year Limited Warranty Terms

Details the terms and limitations of the limited warranty.

Warranty Service Procedure

How to obtain warranty service, including notification and proof of purchase.

Broan QP342SS Specifications

General

Brand	Broan
Model	QP342SS
Category	Ventilation Hood
Language	English