2. Technical Specifications
No.
MODEL
BDF32-1 BDF45-1
2.1 Max. drilling capacity 32mm 45mm
2.2 Taper of spindle hole Morse No.3 Morse No.4
2.3 Max. travel of spindle 130mm
2.4
Distance between the centre of spindle and
the surface of the vertical column
283mm
2.5
Maximum distance between the spindle
nose and the surface of working table
725mm
2.6
Maximum distance between the spindle
nose and the base surface
1125mm
2.7
Maximum travel of the supporting
block of working table 600mm
2.8 Maximum travel of spindle box 250 mm
2.9 Dimensions of working table 380 mm×300mm
2.10 Steps of spindle 6
2.11 Speed of spindle ( r/min )
50Hz:80;145;260;375;710;1250
60Hz:95;175;310;450;850;1500
2.12 Dimensions of the base surface 417 mm×416mm
2.15 Motor
Power (KW) 1.5 1.5
Voltage (V) 3Ø ,415 ∆ (AUS) - 3Ø , 220 ∆ / 415 Y (US)
Speed (r/min) 1400
2.16 Overall dimensions (L×W×H) 737 mm×600 mm×1680mm
2.17 Net Weight/Gross weight (Kg) 430/480 435/485
To Next Page
Loading...