Need help?Do you have a question about the Brocade Communications Systems FCX 648S-HPOE and is the answer not in the manual?
Details the physical characteristics, storage requirements, and tamper evidence of FIPS security seals.
Outlines the necessary kit and cleaning procedures required before applying FIPS security seals.
Instructions for applying FIPS seals to Brocade FCX 624S-F, FCX 624S, and FCX 624S-HPOE models.
Details FIPS seal application for Brocade FCX 648S and FCX 648S-HPOE devices.
Guide for applying FIPS security seals to Brocade FastIron SX 800 devices.
Instructions for applying FIPS security seals to Brocade FastIron SX 1600 devices.
General| Model | FCX 648S-HPOE |
|---|---|
| Product Series | FCX Series |
| Manageable | Yes |
| Port Quantity | 48 |
| Copper Ports | 48 x 10/100/1000Base-T |
| SFP Ports | 4 |
| Expansion Slot Type | SFP+ |
| Power over Ethernet | Yes |
| PoE Budget | 740W |
| Switching Capacity | 176 Gbps |
| Stacking | Yes |
| Power Supply | Internal |
| AC Power Supply | 100-240 VAC |
| Operating Humidity | 10% to 90% non-condensing |
| Layer Supported | Layer 3 |
| Device Type | Layer 3 Switch |
| Uplink Ports | 4 x 10GbE |
| MAC Address Table Size | 32000 |
| IPv4 Routing Table Size | 12000 |
| Dimensions (W x D x H) | 44.0 x 40.6 x 4.4 cm |
| Operating Temperature | 0°C to 50°C |
| Form Factor | 1U |
To Next Page
