Brocade Communications Systems FCX Series Step-By-Step Guide

DATA CENTER CONFIGURATION GUIDE
Configuring an iSCSI SAN Using Brocade FCX Switches 23
!
interface ethernet 1/1/22
flow-control neg-on
!
interface ethernet 1/1/23
flow-control neg-on
!
interface ethernet 1/2/3
link-aggregate active
!
interface ethernet 1/2/4
link-aggregate active
!
interface ethernet 2/1/5
flow-control neg-on
!
interface ethernet 2/1/6
flow-control neg-on
!
interface ethernet 2/1/15
flow-control neg-on
!
interface ethernet 2/1/16
flow-control neg-on
!
interface ethernet 2/2/3
link-aggregate active
!
interface ethernet 2/2/4
link-aggregate active
!
!
!
!
!
!
!
end
telnet@STACK1(config)#
telnet@STACK2(config)#show running-config
Current configuration:
!
ver 07.1.00T7f1
!
stack unit 1
module 1 fcx-48-4x-port-management-module
module 2 fcx-sfp-plus-4-port-10g-module
stack-port 1/2/1 1/2/2
stack unit 2
module 1 fcx-48-4x-port-management-module
module 2 fcx-sfp-plus-4-port-10g-module
stack-port 2/2/1 2/2/2
stack enable
!
!
!
!
!
spanning-tree 802-1w
!
!
buffer-sharing-full

Brocade Communications Systems FCX Series Specifications

General

Brand	Brocade Communications Systems
Model	FCX Series
Category	Switch
Language	English