broda V4 - 5 Technical Information; Specifications

17
5 6BTECHNICAL INFORMATION
5.1 30BSpecifications
Specifications Based on 20” Wide Synthesis V4 chair
1. Back Recline:
Up to 90º (infinitely adjustable)
Trendelenburg position capable
2. Seat Tilt:
Up to 40º of seat tilt (infinitely adjustable)
3. Frame:
Powder coated steel
4. Seat/Back Surface:
BRODA Comfort Tension Seating® Strapping is 1-1/2” wide, by 1/8” thick; contains
fungicide, has shape memory retention, is fire retardant
5. Arms:
Seat mounted arms
Swing away and removable
Adjustable armrest height
6. Leg Rest:
Leg rest articulates and extends with back recline
Leg rest adjusts independently of back recline
Leg rest adjusts to any angle between horizontal and vertical
7. Footrest:
Split flip down removable/adjustable footrest
8. Wings:
Adjustable and removable wings for upper lateral support
9. Padding:
Removable padding (shoulder bolsters, neck rest, upper & lower side pads, seat and
back pad with removable terry cover, calf pad, sole pad, extra terry covers)
The 34 ounce healthcare vinyl fabric covering is manufactured to meet the following
requirements: DIN 75 200/DIN 53 438; MVSS 302, M2;CAL 117, and Wyzenbeck
Heavy Duty Abrasion Test; has an antimicrobial, antibacterial, anti-stain and anti-static
finish; Cold crack of -20ºC. Polyurethane foam meets CAL 117-2013.
Removable seat and back pads are covered with an 8 ounce soft vinyl which meets
CAN2-162 flammability standard for hospital textiles. Polyurethane foam meets CAL
117-2013. Removable, washable, pre-shrunk fitted cotton terry covers are provided for
the seat and back pads. Terry covers provide absorption, and vapor and heat transfer.
10. Casters:
5” total lock front casters, 6” Single directional locking rear casters
Non-marking grey rubber tires.
11. Seat Depth:
17”
12. Seat Height:
20.5”
13. Seat Width:
20” (18” also standard)
14. Overall Width:
29”
15. Overall Height:
50”
16. Weight Capacity:
350 lbs
17. Overall Weight:
Approx. 115 lbs standard features
All dimensions are ± 0.5”.