EasyManua.ls Logo

broda V4 - Rear Casters

broda V4
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Note: When adjusting cylinders with tools that come in
contact with the cylinder rods, a cloth or some other
protective material must be used to protect the sliding
surface of the rod. If the rod becomes scratched or
marred it will damage the seal on the cylinder and the
cylinder will fail.
Damaging a cylinder in this fashion voids the
manufacturer’s warranty.
5.4 34BRear Casters
Symptom
Problem
Solution
The rear caster function is controlled
by one step on the rear pedal.
The rear caster is not engaging into
the correct position when using the
rear pedal.
The rear caster is no longer
functional.
The rear caster must be replaced.
Contact BRODA or your local
representative.
Rear Pedal