To Next PageTo Next Page
Need help?Do you have a question about the Bromic Heating STRATOS BRAHMA 3.0 NG and is the answer not in the manual?
General| Brand | Bromic Heating |
|---|---|
| Model | STRATOS BRAHMA 3.0 NG |
| Category | Gas Heater |
| Language | English |
Important notes about the manual's integral part and appliance usage.
Critical safety warnings and prohibitions for appliance operation.
Details the functions of the On/Off, temperature, and wireless command keys.
Explains the information shown on the display and the meaning of various icons.
Important notes regarding environmental respect and proper installation practices.
Guidelines for selecting the optimal placement for the appliance.
Instructions for assembling the outside grill components (GP and GPu).
Guidance on assembling the parallel tube kit with a unique terminal.
Details on connecting the appliance to the mains power supply, emphasizing earthing.
Instructions for connecting the gas supply, including pipe fittings and seal tests.
Steps to take before the initial start-up, including checks and humidifier tray usage.
Step-by-step guide to starting the appliance for the first time.
Procedure for resetting the control unit in case of malfunctions.
Checks to perform during and after the initial start-up, including gas pressure verification.
Recommended annual maintenance procedures.
Instructions for cleaning the appliance cover and burner.
Guide for cleaning ignition and revelation electrodes.
Inspecting pressure switch tubes for deposits or condensation.
Steps to replace the room probe and convection fan.
Procedures for replacing the protection fuse and combustion air fan.
Instructions for replacing ignition and revelation electrodes.
Steps for removing and refitting the safety thermostat.
Procedure for replacing the valve gas coil.
Instructions for replacing the coil modulator.
Steps to remove and refit the gas valve.
Instructions for replacing the pressure switch.
Guide for replacing the fan condenser on specific models.
Steps for disassembling the appliance casing.
Identifies causes and remedies for the appliance failing to start.
Outlines issues when the appliance starts but doesn't function correctly.
Troubleshooting steps for timer malfunction.
Addresses thermostat, ignition, and burner operation issues.
Diagnoses heating, fan, and air flow problems.
Solutions for digital display issues and vibrations.
