Brook WINGMAN XB2 - Connection Pairing Instructions; Pairing Mode Activation and Duration; Wireless Connection Record Management; Xbox One Elite Controller Settings

step.1
Holding the LED buttons on the two sides of the Wingman XB 2 for 1
second will activate wireless connection pairing mode. The Wingman
XB 2 will engage in pairing with surrounding Bluetooth devices. The
pairing mode will end if:
A. The connection pairing with the wireless controller is successful.
B. The connection pairing is unsuccessful after 1 minute.
C. The LED buttons are held for 1 second.
step. 2
Wireless connection records between an Xbox One wireless
controller (with Bluetooth function)/Xbox One Series 2 and the
Wingman XB 2 will be erased if a wired connection is used. Wireless
connection re-pairing will be required if wireless connection is used.
step. 3
If Xbox One Elite Series 2 controller is used, please turn o controller
prole settings to prevent interference with Wingman XB 2’s Turbo or
Remap settings. As Xbox One Elite Series 1 controller is incapable of
turning o prole settings, using Xbox One Elite Series 1 controller
might result in Remap function overlapping.
Connection Pairing Supplementary Instructions
6