Brook Ras1ution2 User Manual

For more Details please visit our official website at
www.brookaccessory.com
Ras1ution 2 has two main modes: steering wheel mode and controller mode.It's
suggested to choose steering wheel mode on each according console at rst.
Some games may not recognize steering wheel mode, you can then choose
controller mode to play.
*Note: There's just controller mode for Switch.
Press the start button to choose the platform (switch on the left or
right key) and press the start button to save.
You can set the force feedback strength (±20 stages)/steering
range (±20 stages)/dead zone (±20 stages)/Language on menu
and press start button to save.
*Brook supply the Ras1ution app, you can download from App store/Google play to
set and save the mode as you wish (this prole will save in your mobile, you can
connect it no matter where you are)
*You can connect to PC or using Bluetooth to update the rmware of Ras1ution
(Please check the Bluetooth & rmware versions on the screen.)
In force feedback strength, steering range and
deadzone pages, you can press the left/right key to
increase or decrease and press the start button to
save, press down key to resume default setting or
press up key back to the menu.
step.5
step.4
202203V1
START
Screen
Start button
Up
Down
Right
Left
START
Plug into consoles:
1
2
USB port1
USB port2
Racing
wheel
For racing wheel
accessories
Connect the Ras1ution 2 converter to the console.
Connect your racing wheel to USB port 1.
step.3
step.1
step.2
Controllers
and Sensors
System Settings
Pro Controller
Wired Communication
ON
On Switch, go to System Settings
Controllers and Sensors, and
turn ON Pro Controller
Wired Communication.
SWITCH
Switch
PS3
PS5
Xbox One Xbox 360XSX|S
PS4
M/N：ZPP0053

Brook Ras1ution2 Specifications

General

Connectivity	USB
Audio Support	Yes
Turbo Function	Yes
Remap Function	Yes
Platform Conversion	Yes
Input Ports	USB
Output Ports	USB
Firmware Update	Yes
Input	Xbox Series X|S / Xbox One / Switch
Output	PS5 / PS4 / PS3 / Switch / Xbox Series X|S / Xbox One / Xbox 360
Compatibility	PS4, Xbox One, Xbox Series X|S, Switch
Dimensions	70mm x 40mm x 15mm

Summary

Ras1ution 2 Setup Guide

Initial Connections

Connect the Ras1ution 2 converter to the console and the racing wheel to USB port 1.

Platform Selection

Press the start button to choose the console platform and save the selection.

Controller Settings Adjustment

Configure force feedback, steering range, deadzone, and language settings.

Nintendo Switch Configuration

Enable Pro Controller Wired Communication in Switch system settings.

Software and Firmware Updates

Download the Ras1ution app or connect via Bluetooth for updates.