Instrument Setup
Operation
QS-Dial Rev. 2.0
Dial Reading Viscometer
Quick Start Guide
(800) 528-7411 or (602) 470-1414
brookfieldengineering.com
As a part of AMETEK Brookfield’s sustainability initiative, we have now moved to a
digital download format for instrument operation instructions (manuals). For a free
download to obtain your manual, simply follow the steps below:
• Access the ‘Manuals’ section of the AMETEK Brookfield online store
navigation bar using the following link or QR code:
store.brookfieldengineering.com/manuals/
▪ For customers outside of the US, you may need to access your regional
AMETEK Brookfield online store.
• Sign into the online store to access your account.
▪ You may need to create a free account if you do not have one already.
• Navigate to your instrument.
• Download your manual by using the link provided.
• To ensure faster support, please visit the following link to register your
instrument: www.brookfieldengineering.com/contactus/register-product
• Assemble laboratory stand (refer to assembly instructions in the Appendix of the manual).
• Mount the viscometer securely on a Brookfield laboratory stand. The metal handle should be inserted into
the laboratory stand clamp. Level the viscometer, referring to the bubble level on the instrument.
• The shipping box containing your instrument should be saved for future use when returning your instrument
to AMETEK Brookfield or your local authorized dealer for service. The carrying case for standard
viscometers/rheometers should also be saved since this provides added protection for these instruments
during shipment.
Instrument Operation Instructions and Product Registration
Scan for Manual
• Be sure the plug of the power supply is securely plugged
into your power source.
• Plug the metal jack of the power supply into the circular
receptacle on the back of the viscometer.
• The black, rubber baton switch on the viscometer controls
the motor and has three positions:
▪ UP: O - turns the motor o and stops the dial
from turning
▪ MIDDLE: On - causes the dial to rotate at the
selected speed
▪ DOWN: Pause (or motor stop) - causes the dial
to pause when rotating
©2023 AMETEK Brookfield. All rights reserved
To Next Page
Need help?
General
