To Next PageTo Next Page
Need help?Do you have a question about the Brookfield DV3T and is the answer not in the manual?
General| Model | DV3T |
|---|---|
| Category | Viscometer |
| Accuracy | ±1.0% of range |
| Repeatability | ±0.2% |
| Interface | USB, Ethernet |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Speed Range | 0.01 to 250 RPM |
| Temperature Measurement | Optional temperature probe |
Provides step-by-step instructions for assembling and setting up the rheometer.
Explains safety symbols and provides essential precautions for safe operation.
Describes the power-on sequence, including the About screen and its displayed information.
Explains the AutoZero process required before making viscosity measurements.
Details how to create and run viscosity tests, including saving and loading tests.
Explains how to create and run yield tests, including test parameters.
Provides quick steps for taking a viscosity reading for experienced users.
Details the necessary preparations for the rheometer and sample before making measurements.
Explains how to create multi-step test programs for comprehensive data collection.
Guides the user on selecting the appropriate spindle and speed for unknown fluids.
Describes how to control sample temperature using connected Brookfield devices.
Describes how to start and monitor a viscosity test using the Running Viscosity Test screen.
Explains how to view, save, and print measurement results from the Results screen.
Details the necessary preparations for the rheometer and sample for yield measurements.
Guides the user on selecting the appropriate vane spindle and speed for yield measurements.
Describes how to start and monitor a yield test using the Running Yield Test screen.
Explains how to view, save, and print yield measurement results from the Results screen.
Explains the Electronic Gap Setting feature, toggle switch, and indicator lights.
Details the procedure for setting and verifying the cone-plate gap using electronic features.
Outlines the process for verifying calibration using viscosity standard fluids.
Outlines calibration steps for standard spindles, excluding specific ones.
