To Next PageTo Next Page
Need help?Do you have a question about the Brookfield DV1 and is the answer not in the manual?
General| Speed Range | 0.3 to 100 rpm |
|---|---|
| Display | LCD |
| Number of Speeds | 18 |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Viscosity Range | 1 to 2, 000, 000 cP |
| Temperature Measurement | Optional |
| Accuracy | ±1% of full scale range |
| Repeatability | +/- 0.2% |
Provides detailed specifications including speeds, weight, operating environment, accuracy, and certifications.
Details the step-by-step procedures for installing the DV1 Viscometer and its accessories.
Explains the importance and procedure for performing the AutoZero function before measurements.
Explains how to select the appropriate spindle for viscosity measurements.
Details how to select the rotational speed for viscosity measurements.
Details critical preparations for the viscometer and sample before measurements.
Guides the user on how to choose the correct spindle and speed for unknown fluids.
Outlines the general steps for performing a viscosity measurement with the DV1 Viscometer.
Explains the process of accurately setting the gap for Cone/Plate measurements.
Outlines the procedure for making viscosity measurements using Cone/Plate geometry.
Details how to verify the calibration using viscosity standard fluids for Cone/Plate.
Details the calibration check procedure for the Small Sample Adapter.
Outlines the calibration check procedure for the Thermosel System.
Details the calibration check procedure for Cone/Plate Viscometers.
Explains how to interpret calibration test results and calculate total allowable error.
Troubleshooting steps for when the spindle fails to rotate.
Steps to take when experiencing inaccurate viscosity readings.
