Brookfield DV1 User Manual

Brookeld Engineering Laboratories, Inc. Page 18 Manual No. M14-023
II.6SpeedSelecon
Table II-1 shows the available speed selections.
DV1 SPEEDS SETS
100
50
20
10
5.0
4.0
2.5
2.0
1.0
0.5
0.0
60
30
12
6.0
3.0
When scrolling 1.5
“UP” 0.6
0.3
Beginning 0.0
Table II-1
NOTE: DV1 speeds are organized to conform to the historical speed sets available on the
Brookeld Dial Reading viscometer. Speeds from 0.3-60 RPM are traditionally found
on the LVT viscometer. Speeds from 0.5-100 RPM are traditionally found on RVT,
HAT and HBT viscometers.
Pressing the SPEED Hot Key on the Home screen will present the Set Speed screen.
Figure II-6
Press the Up/Down Arrow keys to scroll through the list of available speeds. When the correct speed
is shown on the display, press the SELECT Hot Key. e display will return to the Home screen.

Brookfield DV1 Specifications

General

Speed Range	0.3 to 100 rpm
Display	LCD
Number of Speeds	18
Power Supply	100-240 VAC, 50/60 Hz
Viscosity Range	1 to 2, 000, 000 cP
Temperature Measurement	Optional
Accuracy	±1% of full scale range
Repeatability	+/- 0.2%