To Next PageTo Next Page
Need help?Do you have a question about the Brookfield LVDV-I+ and is the answer not in the manual?
General| Model | LVDV-I+ |
|---|---|
| Speed Range | 0.3 to 100 rpm |
| Number of Speeds | 18 |
| Accuracy | ±1.0% of range |
| Repeatability | ±0.2% |
| Temperature Measurement | Optional |
| Interface | RS-232 |
| Type | Viscometer |
| Spindle Types | LV |
| Spindle Options | RV/HA/HB spindles |
| Temperature Range | Depends on accessory |
| Display | LCD |
| Power Supply | 100-240V, 50/60Hz |
Step-by-step instructions for assembling the laboratory stand and mounting the viscometer.
Explains safety symbols and provides essential precautions for instrument use.
Describes the function of each control key on the DV-I+ Viscometer's front panel.
Explains how to select and attach spindles, including entry codes for calculations.
Details how to select and set the rotational speed for the viscometer measurements.
Details the Timed Stop and Time to Torque capabilities for automated testing.
Details the procedure for adjusting the gap using the micrometer adjustment ring and reference marker.
Explains how to verify calibration using viscosity standard fluids and specific measurement steps.
Outlines the calibration process for standard Brookfield spindles using viscosity standards.
Troubleshooting steps for when the viscometer spindle fails to rotate.
Guidance on identifying and resolving issues leading to inaccurate viscosity readings.
