To Next Page

To Previous Page

Brookeld Engineering Labs., Inc. Page 18 Manual No. M13-167-A0415

TheCommandKeysincludeClear,SaveandRun.

Clear: Clearalldatathathasbeenenteredintothetestparameters

andrestorethevaluestothefactorydefault.

Save: Savethecurrenttest.

Run: Runthecurrenttest.

TheTestParameterareaincludesmanyelementsoftheviscositytestaswellaslivemeasurements

ofTorque%andTemperature.TemperaturedatawillonlybedisplayedifaBrookeldtemperature

probeisconnectedtotheDV3TRheometer.

Torque: Alivesignalfromtherheometer.

Spindle: Thecurrentlyselectedspindle.Allviscosity,shear

rate,andshearstresscalculationswillbemadebased

onthisspindle.Thespindlenumbermaybechanged

bypressingthebluearrow.

Speed: The currently selected speed of rotation.  The

rheometerwilloperateatthisspeedoncetheRUN

commandkeyispressed.Thespeedmaybechanged

bypressingthebluearrow.

Temperature: Alivesignalfromtherheometerwhenatemperature

probeisattached(BrookeldpartnumberDVP-94Y

orSC4-61Y).

EndCondition: Specifytheconditionthatwillendthetest.

DataCollection: Specify the amount of data to be collected during

thetest.

Instructions: Createamessagethattheuserwillseewhenthetest

begins.

Reports: Denehowthedatawillbeviewedwhenthetestis

complete.

QCLimits: Denethelimitsforacceptablemeasurementdata.

Density: Denethedensityofthetestsample.Thisinformation

will be used when kinematic viscosity units are

selectedfordisplay(seeSectionV.4.2)

 II.5.2 CongureYieldTest

YieldmeasurementsaremadeontheDV3TRheometerthroughtheCongureYieldTestfunction.

TheusercanselectCongureYieldTestfromtheHomeMenu

Brookfield DV3T User Manual

Questions and Answers: