Brookfield DV3T - IV.7 Results

Brookeld Engineering Labs., Inc. Page 54 Manual No. M13-167-A0415
optionalchamberswithembeddedtemperatureprobes(SmallSampleAdapter).Theunitsof
temperaturearedenedintheGlobalSettingssectionoftheSettingsMenu .
Thetemperaturedisplaywillbe----whennotemperatureprobeisconnected.
SpeedistheselectedspeedfromtheCongureYieldTestscreen.
Thestatusofthetestcongurationisindicatedinthegreybarabovethedataelds.Aconguration
thathasbeensavedwillbeindicatedbyadisplayofthetestlename.Acongurationthatisnot
savedwillbeindicatedbyadisplayofUnsavedTest.
TheReal Time GraphisdisplayedatthebottomoftheRunningYieldTest.Thisgraphshowsall
measurementsduringthelifeofthetest.TheY-Axiscanrepresentanydataeld.Thedataeld
representedonthegraphisshownbythebluedot;forexample,inFigureIV-7,Torqueisshown
onthegraph.Anydataeldcanbeselectedbytouchingthescreen.
TheRealTimeGraphwillindicatedatapointscollectedaspartoftheTestwithabluedotindicating
thenalpoint.Attheconclusionofthetest,theRealTimeGraphisdisplayedforreview.Once
theOKbuttonispressed,thescreenwilltransitiontoResults.
QCLimitswillbeindicatedontheRealTimeGraphwhentheselectionforY-Axisisthesameas
theselectionforQCLimits(seeSectionIII.9).
TwoCommandKeysareavailableontheRunningYieldTestScreen:StopTestandViewTest.
StopTest:Immediatelystopthecurrenttest.Theuserwillbepresentedwithaconrmation
box.ThetestwillcontinuetorununtilYesisselectedintheConrmationbox.Theuserwill
bepresentedwiththeResultsscreenwithanydatathatwascollected.
ViewTest:Changetheviewfrommeasurementtothetestparameters.TheViewTestscreen
includesalivedisplayoftemperature.ViewTestincludestheStopTestcommandkeyanda
BackArrowintheNavigationBar.TheBackArrowisusedtoreturnthedisplaytotheRunning
YieldTestview.
IV.7 Results
MeasurementdataisviewedintheResultsscreen.Thisscreenispresentedattheconclusionofa
testorwhendataisloadedthroughtheViewResultsselectionfromtheHomeMenu
.
TheDV3Tutilizesacomprehensivedataformat.Datalesincludethecompletesetofmeasurement
resultsandcalculatedvaluesalongwiththetestprotocol.Allelementsofthetestcanbeviewed
intheResultsscreen.
TheDV3TRheometerallowsfor5000totaldatapointsperle.Whenviewinglargedatales,
additionaltimeisrequiredwhenmovingfromthevariousResultsoptionslistedbelow.Theremay
besomedelayonthescreenwhiletheDV3Tpreparesthedata.