Brookfield DV3T - II.5.1 Configure Viscosity Test

Brookeld Engineering Labs., Inc. Page 16 Manual No. M13-167-A0415
II.5 Home Screen
TheDV3THomescreencanbeaccessedbyusingtheHomeIcon
.TheHomescreenshows
theMainMenufunctionsandprovidesaccesstoUserLogInandSettings(seeSectionV.4).
Figure II-3
Congure Viscosity Test:CreateandRunviscositytests.
Congure Yield Test:CreateandRunyieldtests.
Load Test:LoadatestthathaspreviouslybeensavedorcreatedwithPGFlashsoftware.Tests
maybeloadedfrominternalmemoryoraUSBFlashDrive.
View Results:LoadResults(savedtestdata)thathavepreviouslybeensaved.Resultsmaybe
loadedfrominternalmemoryoraUSBFlashDrive.
Manage Files: ManagethelesystemintheinternalmemoryoronaUSBFlashDrivefortest
programsandsaveddata.Createnewfolderstructures,deleteles,renamelesandmoveles.
External Mode: DirecttheDV3TtocommunicatewithBrookeldRheocalcTSoftwarefor
completerheometercontrol.
EachoftheMainMenuitemsaredetailedinthefollowingsectionsofthemanual.
 II.5.1 CongureViscosityTest
ViscositymeasurementsaremadeontheDV3TRheometerthroughtheCongureViscosityTest
function.TheuserispresentedwithCongureViscosityTestattheconclusionoftheAutoZero
functionorbyselectionontheHomeMenu
.
All elements related to the measurement of viscosity are selected within Congure Viscosity
Test.TeststhatarecreatedcanbesavedtotheinternalmemoryoftheDV3TRheometeroronto
aconnectedUSBFlashDrive.TestscanbeloadedfrommemorybyselectingLoadTestfromthe
HomeScreen
.
TIP:ManyaspectsofCongureViscosityTestcanbelimitedwhenUserIDandLogInfunctions
areimplemented(seeSectionV.4.2).