Brooks FluidX Scope USB - Page 16

Brooks Automation FluidX
Part Number: 281947 Rev. C
ThecontinuousscanningfeatureoftheScope
USBreadercanbeturnedONbyscanningthe
Continuous Scan ONQuickSetupCodeonPage11.If
thecontinuousscanhasbeenenabled,usethefollowing
instructions.
Step Action
1.
Holdthetubeapproximately0.5cm(0.2in)from
thescanningwindow.
NOTE: This will prevent cross contamination
and damage to the scanning window..
2.
Theunitwillbeeponcetoindicateasuccessful
read.
8
Copyright © 2020, Brooks Automation, Inc.