Brooks FluidX Scope USB - Reading a Tube

Brooks Automation
Part Number: 281947 Rev. C
5. Reading a Tube
TheFluidXScopeUSBmakesreadingtubeseasy.By
default,thedeviceisnotincontinuousscanningmode,
sothebuttonwillneedtobepressedtoscan.
Step Action
1.
Holdthetubeapproximately0.5cm(0.2in)from
thescanningwindow,andthenpressthebutton
ontopofthereader.
NOTE: This will prevent cross contamination
and damage to the scanning window.
2.
Theunitwillbeeponcetoindicateasuccessful
read.
Copyright © 2018, Brooks Automation, Inc.
7
Copyright © 2020, Brooks Automation, Inc.
7