EasyManua.ls Logo

Brookstone CandyMan - Filling and Using the CandyDispenser; Filling the CandyMan; Operating the CandyMan

Brookstone CandyMan
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
fIllInG CanDYMan
TM
1. Remove the LID.
2. Pour candy or nuts into the RESERVOIR DOME.
3. Replace the lid, making sure the lid alignment
graphic lines up with the finger groove on
the RESERVOIR DOME (see at right).
4. Place on a flat, level surface.
UsInG CanDYMan
TM
1. Turn the knob to the desired setting:
Small handful
:
• Small-sized candy or nuts: approximately 15-20 pieces
• Large-sized candy or nuts: approximately 6-8 pieces
Large handful
:
• Small-sized candy or nuts: approximately 30-35 pieces
• Large-sized candy or nuts: approximately 10-12 pieces
Bowl
:
• Small-sized candy or nuts: approximately 80-90 pieces
• Large-sized candy or nuts: approximately 25-35 pieces
2. Place your hand or bowl under the chute to activate the sensor and candy/nuts
will be dispensed.
3. Wait until all candy/nuts are dispensed before removing your hand or bowl.
Finger Groove