6. Replace RESERVOIR DOME by lining up the thumbscrew tab first and then
snapping in the front to the main body (see illustration below).
9
7. Screw in the THUMBSCREW to secure the FUNNEL and the RESERVOIR
DOME to the MAIN BODY. Do not overtighten.
8. Replace the LID, making sure the lid alignment graphic lines up with the finger
groove on the RESERVOIR DOME.
PoWeR soURCe
INSTALLING THE BATTERIES
1. Lift the BATTERY COVER to open.
2. Insert 4 AA batteries according to the polarity indicators inside
the compartment.
3. Replace the BATTERY COVER.
IMPORTANT: Always replace batteries with NEW batteries of the same size
and type. It is also recommended to use non-rechargeable alkaline batteries.
Step 1 Step 2
To Next Page
Loading...