7
CleanInG The UnIT
It is recommended to clean the lid, reservoir dome, funnel, auger cover, auger and
auger base before the first use. The unit must be disassembled before cleaning.
Remove the batteries and unplug the adapter before cleaning any parts.
DISASSEMBLE
1. Make sure the SETTINGS KNOB is turned to and that there are no
candy/nuts in the reservoir.
2. Unscrew and remove the THUMBSCREW on the rear of the unit.
3. Remove the RESERVOIR DOME, LID, FUNNEL, AUGER COVER and AUGER.
Unscrew the 2 AUGER BASE SCREWS (Phillips #2 screwdriver required) and
remove the AUGER BASE.
Note: Do not operate CandyMan
TM
when it is disassembled.
IMPORTANT: DO NOT clean any parts in the dishwasher.
Hand wash parts with mild dish detergent. Make sure all parts are dry before
reassembling.
Parts you may hand wash with mild detergent:
• Lid
• Reservoir dome
• Funnel
• Auger cover
• Auger
• Auger base
To Next Page
Loading...