15
TRoUbleshooTInG
Q. The Projector will not show the video on the wall.
A. Recharge your device’s battery. Also, check to see if the HDMI cable
is fully inserted into the Projector and your device.
Q. The video showing on my wall is blurry.
A. Adjust the Focus Wheel on the Projector to fine-tune the picture.
It may also depend on the surface on which you are attempting to
show your video. Try moving to a location with a smoother wall surface.
Q. I cannot get my device to work at all with the Projector and its battery
is fully charged.
A. Make sure the cables are inserted into the correct ports and test
connections.
Q. No signal - I am getting no input from my device.
A. Make sure your device is on - and fully charged.
To Next Page
Loading...
Need help?
General
