Playing Music
To play music on the soundbar, you must be paired to a Bluetooth-enabled device, or
connected with an aux cable. See the Bluetooth Pairing and Using the 3.5 mm AUX Input
sections of this manual for further instruction.
Adjusting Volume
Adjust volume by turning the [Volume] dial on the soundbar, or use the controls on your
connected device.
Using the LED Lights
• Press the [ ] button on the soundbar or the [LED] button on the remote control to flip
through LED light modes.
Bluetooth Pairing
1. Power the soundbar ON. A tone will be heard and soundbar will enter Bluetooth pairing
mode.
2. Set your mobile device to search for Bluetooth devices. When it appears, select BSSK9037
from the list of found devices.
3. After a successful pairing, a tone will be heard and you will be able to play music on the
soundbar.
In Bluetooth mode, playback will be controlled by your paired device. Volume can be adjusted
with the dial on the soundbar or with the controls on your paired device.
6
To Next Page
Loading...