15
OPERATING THE PROJECTOR
SeTUP
1. The projector can be powered using the internal battery or while plugged into power
with the USB-C charging cable.
• To power the projector with AC power, connect the power adapter to the USB-C
charging cable. Connect the USB-C end of the cable to the projector’s DC in port
and the power adapter into an outlet. Once connected, the power indicator light will
illuminate on the projector.
• To power the projector with the built-in battery, simply turn the projector on.
IMPORTANT: Fully charge the battery before first use (approx. 4-5 hours).
2. Power on the projector by pressing and holding the power button for 3 seconds.
Allow the projector 15 to 30 seconds to fully start up and make image adjustments.
To Next Page
Loading...
