16
CONNeCTiNg THe PrOjeCTOr TO A WireLeSS NeTWOrk
1. Select “Settings” from the projector’s home screen.
2. Scroll to “Wi-Fi” on the settings menu.
3. Select “Scan” to search for nearby available networks.
4. Select the desired network from the listed options.
5. Enter the required network credentials, then select “Connect.” Allow the projector and
the network a few seconds to sync.
6. Press the “Home” button on the remote to return to the projector’s home screen.
The wireless icon will be displayed in the projector’s home screen status bar if the
connection setup was successful. The number of blue shaded bars on the icon
depicts the strength of the wireless signal.
• Not connected
•
Weak wireless signal
•
Strong wireless signal
To Next Page
Loading...
