28
TROUBLESHOOTING
The projected image is blurry.
• Adjust the focus on the projector to fine-tune the picture.
• Check that the surface you are projecting on is smooth.
• Check that the projector’s lens is free of dust and debris.
The projected image is too small.
• Move the projector farther away from the projection surface.
The projected image is smaller on one side and larger on the other.
• Adjust the projector so the lens is facing your projection surface at a 90° angle.
The projector is not powering on.
• Check the battery power on the projector. If the battery is depleted, plug the
projector into power.
• Check that the charging indicator light is illuminating when the projector is
plugged into power.
To Next Page
Loading...
