18
RECORDING A PATH
The Rover can record up to 30 seconds of a driving route, and then repeat it all
by itself!
1. To record a path, press the Make Path
button and drive the Rover on the
route you want to record.
2. After you complete your route, press the Make Path
button again to save.
3. Press the Play Path
to play the recorded route and the Rover will
automatically drive the route you recorded – all by itself.
Note: If the Rover is reset, or the batteries are removed, the saved route
will be erased.
719302_INS1211_Rover_Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
To Next Page
Loading...
