• To erase a section of your scan simply select erase in the menu at the right
of the scanned image window and roll the mouse over the sections you’d like
to remove.
• To check whether a large image is scanned properly, roll the mouse wheel up/
down to zoom in/out the area where the mouse cursor is located.
• Pressing the Smart Scan button on the mouse restarts the scanner. Be careful
not to press the Smart Scan button unless you wish to scan the document again.
• Selecting OK: Confirms your selection and initiates the OCR function.
• Selecting Cancel: De-selects your selection. The entire scanned image will be
displayed in the preview window, and the OCR function is disabled.
Tip:
If your final edited image is not what you wanted, you can double-click the Edit
icon or the preview window to edit again with the editing functions.
SETTINGS
Modify the resolution, image size, UI language, OCR language, scan size, etc.
Maximum Resolution to Full: 400 dpi, High: 320 dpi, Medium: 200 dpi, Low: 100 dpi.
*The resolution may be lower than the available options due to your computer
specifications and/or user settings.
13
To Next Page
Loading...
