4
10. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit.
Incorrect repair can cause risk of electric shock or injury to persons when unit is used.
11. Do not operate in the presence of explosive and/or flammable fumes.
12. Never remove the USB from the port by pulling the USB cord.
13. Do not direct the LED light or laser beam towards your eyes. Otherwise, this may
cause damage to your eyesight or a loss of vision.
14. If the product is emitting smoke, unusual odors or sounds, stop using immediately
and disconnect it from the computer.
15. Do not install the product in an extremely hot (over 35 °C) or cold (under 5 °C)
area, or with high temperature variation.
16. Do not install the product in a humid or dusty area.
17. Do not disassemble, modify or repair the product.
18. Do not apply excessive shock to the product.
19. Be careful not to drop the product or apply excessive shock to the scan window at
the bottom of the product.
20. Touching the scan window with sharp objects or using the scanner on a rough
surface may cause damage to the scan window. If the scan window is scratched,
the quality of scanned images may deteriorate.
21. When removing fingerprints or dust off the scan window, always use a soft, dry
clean cloth.
817873_INS_Scanner Mouse
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
To Next Page
Loading...
