8
817873_INS_Scanner Mouse
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
Mac
®
- INSTALLING SOFTWARE AND DRIVER
1. Insert the CD and choose the Program Installation for Mac.
2. Click the Install button to display the initial installation screen and follow the
instructions to complete.
3. You may also go to Brookstone.com and search for Scanner Mouse under
817873. Scroll down and locate the “Product Specs” tab, and open.
4. Find Apple/Mac Drivers and select “Click Here to Download Mac Drivers.”
5. After the Driver has downloaded (this may take a moment), open the drive and
double-click on ScannerMouse.pkg.
6. Follow the instructions to complete installing Scanner Mouse Driver
Software for Mac.
7. Connect the scanner mouse to the USB port. Wait until the installation of
its driver is complete.
IMPORTANT! Do not remove the scanner mouse during driver installation. If
the scanner mouse USB is removed, reconnect it to another port or access
the control panel and update the driver.
To Next Page
Loading...
