10
LEFT AND RIGHT RCA OUTPUT JACKS
1. If you are not using battery power, insert one end of the TRANSMITTER DOCK
POWER ADAPTER into DC 9V on the transmitter, and the other end into an
electrical outlet.
2. Insert one end of the DUAL RCA CABLE into the appropriately colored R/L
LINE IN 1 jacks on the transmitter, and the other end into your audio source’s
left and right audio output jacks.
Note: Do not connect the DUAL RCA CABLE to speaker terminals on your
TV or audio source. This may damage the transmitter, your TV or audio source.
HEADPHONE JACK
1. If you are not using battery power, insert one end of the TRANSMITTER DOCK
POWER ADAPTER into DC 9V on the transmitter and the other end into
an electrical outlet.
2. Insert one end of the 3.5MM RIGHT ANGLE CABLE into the 3.5MM LINE IN
2 jack on the TRANSMITTER DOCK and the other end into your audio source
headphone jack.
Note: Inserting a plug into the 3.5MM LINE IN jack automatically mutes
the R/L LINE input source.
Note: If your audio source requires a ¼" headphone plug, you will need
a ¼" adapter (not included).
656744_INS_Universal Dock
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
To Next Page
Loading...
