EasyManua.ls Logo

Brookstone Universal Dock - Page 13

Brookstone Universal Dock
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
6. Press VOLUME or + to adjust the speaker volume to your desired listening
level and press BASS to turn on the bass. The BASS INDICATOR illuminates.
Note: If signal interference occurs, adjust the channel on both the speaker
and the TRANSMITTER DOCK.
7. When not in use, press POWER on the speaker to turn the power off
and remove the batteries to prevent leakage in the compartment.
Slide CHANNEL 1, 2, 3 on the TRANSMITTER DOCK to the OFF position.
USING THE SPEAKERS WITH ANOTHER AUDIO SOURCE
1. If you are not using battery power, insert one end of the SPEAKER POWER
ADAPTER into DC 9V on the speaker and the other end into an electrical outlet.
2. Insert one end of the 3.5MM RIGHT ANGLE CABLE into your audio source’s
3.5MM jack and the other end into MP3 PLAYER AUX IN.
3. Press POWER on the speaker and the SPEAKER POWER INDICATOR
illuminates.
4. Turn on the power to your audio source.
5. Press VOLUME + or to adjust the speaker volume to your desired listening
level and press BASS to turn on the bass. The BASS INDICATOR illuminates.
USING THE SPEAKER LIGHTS
Use the speaker lights for additional ambience at night.
Press the LIGHTS button once to turn the lights on and again to turn the lights off.
656744_INS_Universal Dock
Size:5Wx4.75H_Output:100%_Prints:1/1,Blk

Related product manuals