BrookVent aircycle 4.1 - Introduction; Model Variations

2
V. 4.1-04-08-21
brookvent.co.uk
IMPORTANT
This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
1.0 Introduction
The Brookvent aircycle 4.1 is a highly efficient Mechanical Heat Recovery Ventilation
(HRV/MHRV) system, specifically designed for medium to large dwellings and apartments.
The system should be run continuously 24 hours a day and should only be disconnected
by a competent person during service or maintenance.
Heat Recovery ventilation works best in new homes, which are extremely airtight and
have high efficiency ratings. These dwellings require a high level of fresh air to ensure a
healthy living environment.
The system works by drawing stale air from ‘wet rooms’ such as Bathrooms, WC’s and
Kitchens, recovering up to 94% of the heat from this air using a highly efficient heat
exchanger, before expelling waste air from the home. Simultaneously, fresh air is drawn
into the home, filtered, and warmed by the recovered heat and is supplied into the
‘habitable rooms’ such as bedrooms, dining rooms and living rooms.
1.1 Model Variations
This installation manual refers to the Brookvent aircycle 4.1 and pertains to the
following models:
PRODUCT CODE DESCRIPTION
AS 90-0401-WINS-01 aircycle 4.1 c/w Integral Humidistat - Wall Mount
AS 90-0401-FINS-01 aircycle 4.1 c/w Integral Humidistat - Floor Mount
AS 90-0401-WDS-01 aircycle 4.1 c/w Integral Humidistat - Wall Mount
AS 90-0401-FDS-01 aircycle 4.1 c/w Integral Humidistat - Floor Mount