To Next PageTo Next Page
Need help?Do you have a question about the BrookVent aircycle 4.1 and is the answer not in the manual?
Lists the specific aircycle 4.1 models covered by the manual.
Details the warranty period and conditions for the product.
Provides essential safety precautions for operating the unit.
Outlines the duties and responsibilities of the person installing the unit.
Defines the user's responsibilities for maintaining the system.
Illustrates standard and inverted configurations for duct connections.
Lists materials, electrical details, and control features of the unit.
Presents performance data according to SAP Appendix Q standards.
Displays the unit's airflow versus pressure characteristics.
Provides detailed sound level data across various frequencies.
Presents acoustic data including indicative pressure levels.
Covers general guidelines for securely mounting the unit.
Details the procedure and requirements for wall mounting the unit.
Details the procedure and requirements for floor mounting the unit.
Explains duct sizing, types, bends, and terminal requirements.
Guides on connecting the condensate drain, including trap and fall requirements.
Provides instructions on how to invert the unit for alternative duct connection layouts.
Describes how to reconfigure duct connectors from top to side outlets.
Illustrates the electrical wiring diagram for the unit and controls.
Lists the colour coding for internal wiring connectors for easy identification.
Explains how to adjust trickle and boost fan speeds via the digital display.
Details the step-by-step process for commissioning fan speeds.
Describes how to set and use the internal humidistat for boost activation.
Explains the function and setting of the automatic boost over-run timer.
Details the automatic frost protection feature and its operation.
Explains the automatic summer bypass feature for temperature regulation.
Describes how fan faults are indicated on the unit's display.
Provides an overview of the digital controller's interface and functions.
Guides on the frequency and procedure for changing the unit's filters.
Explains how to check and clean the heat exchange core if needed.
Details the process for replacing a fan unit if it fails.
Outlines the procedure for replacing temperature and humidity sensors.
Describes how to replace the unit's PCB module in case of failure.
Lists other recommended checks during annual maintenance.
Explains common automatic control methods like PIR sensors and humidistats.
Describes typical manual controls like switches for boost or purge.
General