To Next Page
A
Aaron BoydNov 1, 2025
Why does the needle keep breaking on my Brother PDA?
- RRhonda BurtonNov 2, 2025
If the needle breaks on your Brother PDA, there are several potential causes: * The needle might not be installed correctly, so ensure it is properly installed. * The needle set screw could be loose; tighten it securely with the Allen screwdriver. * The needle may be bent or blunt, requiring replacement with a new one. * The bobbin or bobbin case might not be correctly installed; remove and reinstall them. * The upper thread may not be threaded correctly or is catching; re-thread it, ensuring it's caught by the needle bar thread guide and moves smoothly when pulled. * The upper thread tension could be too high; decrease the tension and check that the tension disc rotates when pulling the thread. If the area around the embroidery foot hole or the needle plate is damaged, consi...
General