To Next PageTo Next PageWhy is the fabric puckering with my Brother Sewing Machine?
If the fabric puckers while using your Brother Sewing Machine, check and correct the upper or bobbin threading. Ensure the spool cap is correctly set. Verify that you are using the appropriate needle and thread for the selected fabric. Replace the needle if it is turned, bent, or dull. Adjust the thread tension appropriately.
Why does my Brother Sewing Machine embroidery unit not operate?
If the embroidery unit on your Brother Sewing Machine does not operate, reattach it correctly. If the embroidery frame was attached before the unit was initialized, remove the embroidery unit and then perform the initialization process correctly.
How to fix incorrect thread tension on my Brother Sewing Machine?
If the thread tension is incorrect on your Brother Sewing Machine, check the steps for threading the machine and rethread it. Reset the bobbin. If the needle plate was removed, reinstall it. Ensure you are using the correct needle and thread for the fabric. Adjust the thread tension. Use a correctly wound bobbin. Replace the needle if it is turned, bent, or dull. Make sure you are using a bobbin designed specifically for this machine.
What to do if my Brother Sewing Machine does not operate?
If your Brother Sewing Machine isn't operating, press the “Start/Stop” button. Ensure a pattern is selected and that the embroidery foot is lowered.
Why doesn't the fabric feed through my Brother 882-W30?
If the fabric does not feed through your Brother Sewing Machine, replace the needle if it is turned, bent, or dull. Cut the entangled thread and remove it from the race.
Why doesn't the bobbin thread wind neatly on my Brother 882-W30 Sewing Machine?
If the bobbin thread does not wind neatly on the bobbin of your Brother Sewing Machine, correctly pass the thread through the bobbin winding thread guide. If the bobbin spins slowly, press in the bobbin winding window to increase the bobbin winding speed. Wind the thread that was pulled off around the bobbin 5 or 6 times clockwise. Set the empty bobbin on the pin and slowly turn the bobbin until you hear it click in place.
Why does the bobbin thread break on my Brother Sewing Machine?
If the bobbin thread breaks on your Brother Sewing Machine, reset the bobbin thread correctly. Ensure that the bobbin thread is correctly wound. Replace the bobbin if it has scratches or doesn’t rotate properly. Cut any twisted thread and remove it. Make sure you are using a bobbin specifically designed for your machine.
General| LCD Screen | Yes |
|---|---|
| Speed Control | Yes |
| Application | Sewing |
| Needle Threader | Yes |
| Weight | Approx. 10.5 kg (23.1 lbs) |
| Type | Computerized Sewing and Quilting Machine |
