Brother BAS-311A - Installation; Positioning

OJ Positioning
Determine the position for the sewing machine, and
then lock the casters 0 so that the sewing machine
will not move.
[I] Cord connections
II] Tilting the sewing machine head
II1 Installation of spool stand
Install the spool stand to the table.
Connect the cords for the pedal 8, and the program-
mer e to their respective terminals.
(1) Remove bolt
0 at the back of
the work table, and remove belt
cover D
8.
* Disconnect chain hook S 8
hooked on pedal 8.
(3) Stand at the left side of the
table, and gently tilt the ma-
chine towards you. When re-
turning the machine to the
original position, be careful of
the shuttle hook cover 8 and
the cord.
(2) Remove head lock bolt
8.
* The bolt E) is for transport only.
After installation, keep the bolt
e in the safe· place.
-2-
From the library of: Superior Sewing Machine & Supply LLC