Need help?Do you have a question about the Brother BAS-311H and is the answer not in the manual?
General| Brand | Brother |
|---|---|
| Model | BAS-311H |
| Category | Sewing Machine |
| Language | English |
Explains the meaning of safety indications like DANGER, WARNING, CAUTION.
Describes the warning labels found on the sewing machine and their meanings.
Step-by-step guide for changing settings within the advanced memory switch mode.
How to configure work clamp operating modes using combinations of memory switch settings.
How to set protection levels using Method A, which does not require an SD card.
Procedure to read all machine data (programs, settings, logs) from SD card.
Description of the work clamp lifter mechanism for motor-driven specifications with diagrams.
Description of the work clamp lifter mechanism for pneumatic specifications with diagrams.
Description of the feed mechanism, explaining X and Y movements for pattern creation.
Detailed explanation of the thread trimmer mechanism with diagrams and part identification.
Assembly instructions for the motor-driven work clamp lifter mechanism.
Instructions for installing and adjusting the shuttle hook mechanism.
Assembly steps for the thread trimmer mechanism, including detailed part connections.
Essential safety precautions to take when working with the electric mechanism and control box.
Description of connectors on the main and motor PCBs, including their functions and locations.
Identifies symptoms of poor connections and their corresponding connector locations for diagnosis.
A step-by-step flowchart to diagnose and troubleshoot machine problems based on symptoms.
Detailed solutions and measures for various error statuses, referencing the troubleshooting flowchart.
Specific troubleshooting steps and probable causes for the power indicator not lighting up.
Troubleshooting for error codes appearing on the display when power is turned on.
Troubleshooting for errors occurring when the foot switch is depressed.
Troubleshooting for issues where the X feed does not move, with associated error codes.
Troubleshooting for issues where the Y feed does not move, with associated error codes.
Troubleshooting for problems with the work clamp pulse motor, including non-operation or slight movement.
Troubleshooting for errors like work clamp not rising/lowering, TEST indicator issues, and feed mechanism problems.
Troubleshooting for errors during test feeding, including tension release and sewing operation issues.
Troubleshooting for errors occurring after the machine operates, such as synchronizer or motor issues.
Troubleshooting for issues causing incorrect stitches, including synchronizer and mechanism adjustments.
Troubleshooting steps for when the thread trimmer mechanism fails to operate.
Troubleshooting for needle up stop position errors and SD card read/write mode activation issues.
To Next Page
