1. SPECFICATIONS
1
BAS-311H
1. SPECFICATIONS
Sewing machine Lock stitch pattern tacking sewing machine (with large shuttle hook)
Stitch formation Single needle lock stitch
Max. sewing speed 2,800 sti./min
Max. sewing area (XxY) 150 x 100 mm
Feed mechanism Intermittent feed, pulse motor drive
Stitch length
0.05 − 12.7 mm
No. of stitches 500,000-stitch internal memory (*1)
Maximum No. of stitches 20,000 stitches (per program)
No. of sewing data items
that can be stored
Internal memory: 512 (*1), SD card: 900
Motor-driven work clamp specifications: Pulse motor drive method
Pneumatic work clamp specifications: Pneumatic method
Work clamp lift method
Motor-driven work clamp specifications: Integrated-type work clamp
Pneumatic work clamp specifications: Separate-type work clamp
Work clamp height
Motor-driven work clamp specifications: Max. 25 mm
Pneumatic work clamp specifications: Max. 30 mm
Intermittent presser foot lift
amount
22 mm
Intermittent stroke
2 − 4.5 mm, 4.5 − 10 mm or 0 (Default setting 3 mm)
Hook Double-capacity shuttle hook (standard shuttle hook sold separately)
Wiper device Standard equipment
Thread trimmer Standard equipment
Data storage method Internal memory (Flash memory), SD card (*2)
User programs 900
Cycle programs 30
Motor 550 W AC servo motor
Weights
Machine head approx. 88 kg, operation panel approx. 0.4 kg
Control box 9 kg (Differs depending on destination)
Power source
Single-phase 110V / 220V / 230V, 3-phase 220V / 380V / 400V
(For single-phase 110V and three-phase 380V / 400V, the trans box is required.)
Air pressure 0.5 MPa 1.8 l/min.
(*1) The number of data items and stitches that can be stored will vary depending on the number of stitches in each
program.
(*2) No guarantees of operation can be given for any media.
3190B
To Next Page
Loading...
