7. ASSEMBLY
BAS-311H
68
After installing, carry out the adjustments in "8-19. Belt tension adjustment".
Apply adhesive (Threebond 1324N or
similar) to the outer bearing surface of
the ball bearing (10).
Apply adhesive (Threebond 1324N
or similar) to the outer bearing
surface of the ball bearing (10).
3271B
9. X-pulley bracket
10. Ball bearings [2 pcs.]
11. Timing pulley
12. X-pulley fulcrum shaft
13. Set screws [4 pcs.]
14. Bolts with washer [4 pcs.]
To Next Page
Loading...
