The sewing area of the BAS-311G is 130x100mm, which is larger than that of the previous model.
It offers a wider range of applications, especially in sewing bags and jeans.
Sewing area 130x100mm (BAS-311G)
The angle of the work clamp can be adjusted. Pressure is given
evenly to the front, rear and sides of the work clamp so that a sewn
product can be clamped firmly and accurate sewing finish is
obtained.
Evenly applied presser pressure
Changing sewing pattern is simple
Easy programmer* with large color LCD
Easy programming
•
Programs can be easily created in the same
procedure as the programmer of the previous model.
• A shape of pattern data can be checked while it is
created.
• Comments can be added to the program. Also,
horizontal and vertical sizes are displayed so that
programs of similar figures can be identified.
Sewing data can be managed with programmer
Sewing data management is easy because sewing
data image can be displayed and sewing data can be
copied and moved easily.
*optional product
Work clamp can be replaced quickly and
accurately
Simply by loosening the two screws, the work
clamp can be replaced quickly. It can also be
installed accurately by using the positioning pins.
Feed plate can be replaced accurately
When replacing the feed plate, stitch data can be
easily and accurately aligned with the feed plate
by aligning the reference holes of the needle
plate and the feed plate.
positioning pins
PD-3000
To Next Page
Loading...
Need help?
General
