BAS−7050 1/12
2002.9
BAS−7050
Automatic Belt Loop Sewer
Specifications
Machine head Lock stitch pattern tacker
Sewing speed 2,100 rpm
Stitch length 0.1-10.0 mm
Sewing area X-Y
22 × 3 mm
Number of stitches 29, 36, 43
Height of presser foot 19 mm
Needle type
DP × 17NY #19, #21
Shuttle hook Double
Needle gauge 40-70 mm
Loop cutting Flat-end or V-shaped cut selection
Loop width Flat cut : 9 – 20 mm, V-cut : 9 – 16 mm
Machine time 1.4sec. / loop (29 stitches)
Cycle time 14sec. (29 stitches, 5 loops, including handling)
Power source 3-phase 220 V, 380 V, 400 V, 415 V 600 VA
Air pressure 0.5 – 0.55 Mpa 90 l / min.
Table height 1,000-1,150 mm
Machine dimensions
1100 (W) × 837 (L) × 1,320 - 1,530 (H) mm
Weight 205 kg (220 V), 230 kg (380 V, 400 V, 415 V)
Operation panel setting
Loop length 50 - 120 mm
Bobbin counter 0 - 999
Production counter Max. 9999
Sewing speed 1,900 - 2,100 rpm ( in steps of 100 rpm)
Sewing pattern
Select from 3 sewing patterns (3 settings <enlargement and
reduction> can be applied to each of the patterns)
Enlarging and reducing patterns 45 - 120% in both X and Y directions (with area check)