Need help?Do you have a question about the Brother BES-916AC and is the answer not in the manual?
General| Embroidery Capability | Yes |
|---|---|
| LCD Display | Yes |
| Built-in Memory | Yes |
| Speed Control | Yes |
| Number of Needles | 9 |
| Number of Heads | 1 |
| Needle Threader | Automatic |
| Type | Embroidery Machine |
| Stitch Selection | Not applicable |
| Number of Stitches | Not applicable |
| Buttonhole Styles | Not applicable |
| Needle Positions | Not applicable |
| Stitches | Not applicable |
| Stitch Length | Not applicable |
| Stitch Width | Not applicable |
Explains safety indications and symbols used in the manual.
Details environmental conditions for safe and proper machine operation.
Provides safety precautions and procedures for machine installation.
Explains the various warning labels found on the sewing machine.
Instructions on protecting data on floppy disks from loss or corruption.
Information on the two models explained in the manual.
Overview of the manual's chapter structure and content.
Describes the machine's initial operational screen and its elements.
Technical specifications for the embroidery machines.
Detailed instructions and safety precautions for machine installation.
Procedures for preparing the machine for embroidery operations, including threading.
Explains functions and buttons on the machine's operation panel.
Visual guide for preparing the machine before embroidering.
Instructions on selecting embroidery data from various sources for sewing.
Steps to register embroidery data from a floppy disk into the machine's memory.
Instructions on rotating embroidery patterns by specified angles.
Guide to enlarging or reducing embroidery patterns in X and Y directions.
Configures thread breakage sensor validity and sensitivity.
Configures machine settings like hoop selection and speed ranges.
Basic steps for powering on the machine and preparing for embroidery.
Methods for stopping the machine using stop or emergency switches.
Instructions for cleaning rotary hook and needle plate to prevent issues.
Guidance on oiling the machine's head and needle bars for longevity.
How to adjust presser foot height for different materials.
Steps to synchronize needle and rotary hook timing for proper stitching.
Troubleshooting steps for common mechanical problems.
Troubleshooting guidance for electrical issues and operation failures.
Guide for mounting and connecting the optional bobbin winder.
To Next Page
