9/1/05
1
Perform all maintenance with the machine OFF
Daily Maintenance
Clea nin g Oiling
Rotary hook
1. Open bobbin case cover and remove bobbin case.
Use brush to remove lint build up in and around
rotary hook. Compressed air may also be used.
2. Insert bobbin case in to rotary hook. Make sure
bobbin thread is not over 2 inches long. Close
bobbin case cover.
Rotary hook
1. Rotate the pulley or degree wheel backwards so
that 50 degrees is at the top.
2. Open the bobbin case cover.
Place a small drop of
oil on the raceway as indicated by the arrow. Oil
rotary hook every 3-4 hours of operation.
3. Close bobbin case cover.
4. Rotate pulley in the direction of the arrow or
forward to stop position, 100 degrees.
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email: tsupport@brother.com
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx
B
B
A
A
S
S
-
-
4
4
1
1
6
6
,
,
4
4
1
1
6
6
A
A
,
,
1
1
2
2
1
1
0
0
B
B
E
E
-
-
9
9
0
0
1
1
,
,
9
9
1
1
6
6
,
,
1
1
2
2
0
0
1
1
,
,
1
1
2
2
1
1
6
6
To Next Page
Need help?
General
