Brother BM-2600 - User Manual

2
1
1
2
e
f
8
90 a
bcd
7
1
XC8327-021
Quick Start Guide 1 – Preparing the bobbin thread – / Guide de démarrage rapide 1 – Préparation du fil de la canette – / Kurzanleitung 1 – Vorbereitung des Spulenfadens –
Verkorte handleiding 1 – De onderdraad voorbereiden – / Guía de inicio rápido 1 – Preparación del hilo de la bobina – / Guida di avvio rapido 1 – Preparazione della spolina –
Be sure to first read the “IMPORTANT SAFETY INSTRUCTIONS” in the Operation Manual. For each step in the procedure, refer to the illustration of the sewing machine in the center for an indication of the exact location of the operation.
Lisez attentivement les “INSTRUCTIONS DE SÉCURITÉ IMPORTANTES” du manuel d’instructions. A chaque étape de la procédure, reportez-vous à l’illustration de la machine à coudre, se trouvant au centre, pour une indication de l’emplacement exact de l’opération.
Lesen Sie in jedem Fall zunächst die “WICHTIGE SICHERHEITSANWEISUNGEN” in der Bedienungsanleitung. Beachten Sie bei jedem Bedienungsschritt die Abbildungen der Nähmaschine in der Mitte, aus denen der genaue Ort der Bedienungsvorgänge zu ersehen ist.
Zorg ervoor dat u eerst de “BELANGRIJKE VEILIGHEIDSINSTRUCTIES” in de handleiding hebt gelezen. Voor elke stap in de procedure raadpleegt u de afbeelding van de naaimachine in het midden voor een verwijzing naar de exacte locatie van de handeling.
Lea primero las “INSTRUCCIONES IMPORTANTES DE SEGURIDAD” del Manual de Instrucciones. Para cada fase del procedimiento, fíjese en la ilustración de la máquina de coser que se encuentra en el centro para saber exactamente dónde se sitúa la operación.
Leggere dapprima le “ISTRUZIONI DI SICUREZZA IMPORTANTI” del manuale d’istruzione. Per ogni passo della procedura, fare riferimento alla figura della macchina da cucire al centro per stabilire così l’esatta posizione dell’operazione.
2
480b
3
c f
5
12 34 6

Summary

Preparing the Bobbin Thread

Insert Bobbin Case

Procedure for inserting the bobbin case into the sewing machine for thread preparation.

Pull Bobbin Thread

Drawing out the bobbin thread from the bobbin case to prepare for sewing.

Thread Bobbin Winder

Guiding the thread through the bobbin winder mechanism before winding.

Place Bobbin on Winder

Positioning the empty bobbin onto the bobbin winder spindle.

Secure Thread End

Ensuring the thread end is held securely before starting the bobbin winding process.

Start Bobbin Winding

Initiating the bobbin winding process by engaging the winder mechanism.

Cut Thread After Winding

Remove Wound Bobbin

Insert Bobbin into Shuttle

Secure Bobbin Thread

Thread the Needle

Position Fabric

Start Sewing

Upper Threading

Guide Thread Through Tension Discs

Thread Take-Up Lever

Thread Guide Placement

Thread Needle Eye

Bring Up Bobbin Thread

Position Fabric Under Presser Foot

Lower Presser Foot

Prepare for Sewing

Brother BM-2600 Specifications

General

Type	Mechanical
Bobbin Type	Drop-in
Needle Threader	Automatic
Buttonhole Styles	1-step
Free Arm	Yes
Stitch Functions	Decorative
Presser Feet	Buttonhole foot, Zipper foot
Stitch Length	4mm
Stitch Width	5mm
Weight	6 kg