Why is my Brother BM3700 fabric not feeding properly?
If the fabric does not feed through your Brother Sewing Machine, try lengthening the stitch length. Remove the darning plate if it is fitted on the needle plate. Ensure you are using the right combination of fabric, thread, and needle. Remove any tangled thread, cleaning the race if necessary. Attach the correct presser foot for the type of stitch you want to sew.
Why are stitches skipped on my Brother Sewing Machine?
If stitches are skipped on your Brother Sewing Machine, correct the upper threading and use the right combination of fabric, thread, and needle. Replace the needle if it is bent or blunt, and ensure the needle is correctly installed. Remove the needle plate and clean both the plate and the bobbin case to eliminate any accumulated dust.
Why does the needle keep breaking on my Brother BM3700 Sewing Machine?
If the needle of your Brother Sewing Machine breaks, make sure it is correctly installed and that the needle clamp screw is firmly tightened with the oval screwdriver. Replace the needle if it is bent or blunt, and ensure the upper thread is correctly threaded. Also, use the right combination of fabric, thread, and needle, and attach the correct presser foot for your stitch. Loosen the upper thread tension, lightly guide the fabric and fit the spool properly. If the area around the needle plate or the bobbin case is scratched, contact your retailer or the nearest authorized service center to replace it. Make sure that you are using a bobbin that has been designed for this machine.
Why does the upper thread break on my Brother BM3700 Sewing Machine?
If the upper thread of your Brother Sewing Machine breaks, ensure that you have threaded the upper thread properly, making sure the spool is correctly fitted and the thread is correctly placed in the guide above the needle. Remove any knots or tangles in the thread. Select a needle appropriate for the thread you are using and loosen the upper-thread tension.
Why can't I use the needle threader on my Brother BM3700?
To use the needle threader on your Brother Sewing Machine, raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up, and ensure that you have inserted the needle properly.
What to do if the lower thread is tangled on my Brother BM3700?
If the lower thread of your Brother Sewing Machine is tangled or breaks, wind the bobbin thread properly and replace the bobbin if it is scratched or doesn't turn smoothly. Remove any tangled thread and clean the race. Use a bobbin designed for your machine and reset the bobbin thread correctly.
How to prevent fabric from wrinkling when using my Brother BM3700 Sewing Machine?
If the fabric is wrinkled when using your Brother Sewing Machine, thread the upper thread and wind the bobbin thread properly, and fit the spool properly. Use the right combination of fabric, thread, and needle, and replace the needle if it is bent or blunt. If sewing thin fabrics, use stabilizer material and shorten the stitch length. Attach the correct presser foot for the type of stitch you want to sew.
What to do if the stitch is not sewn correctly on my Brother Sewing Machine?
If the stitch is not sewn correctly on your Brother Sewing Machine, attach the presser foot that is correct for the type of stitch that you want to sew and adjust the tension of the upper thread. Also remove any tangled thread; if the thread is tangled in the bobbin case, clean the bobbin case.
What to do if fabric cannot be removed from my Brother Sewing Machine?
If you cannot remove fabric being sewn with your Brother Sewing Machine, lift up the fabric and cut the threads below it, then clean the race, as the thread is likely tangled below the needle plate.
General| Type | Automatic sewing machine |
|---|---|
| Free arm | Yes |
| Product color | White |
| Buttonhole type | - |
| Number of programs | 74 |
| Sewing machine functions | Sewing |
| Number of stitch patterns | 37 |
| Power supply type | Electric |
Weight and Dimensions| Depth | 159 mm |
|---|---|
| Width | 389 mm |
| Height | 300 mm |
To Next Page
