There are several possible reasons why your Brother Sewing Machine might not be working:
* The machine might not be plugged in, so ensure it is properly connected to a power source.
* The main power switch could be turned off, so turn it on.
* The bobbin winder shaft may be pushed to the right; move it to the left.
* You might not be using the foot controller properly; make sure you are using it correctly.
D
Dr. Tami ThomasAug 18, 2025
How to fix skipped stitches on my Brother CS-100T?
T
Tyler PhillipsAug 19, 2025
If you're experiencing skipped stitches on your Brother Sewing Machine, try these solutions:
* Correct the upper threading.
* Use the right combination of fabric, thread, and needle.
* Replace the needle if it's bent or blunt.
* Insert the needle properly.
* Remove the needle plate cover and clean the plate and the bobbin case to eliminate accumulated dust.
J
Jonathan CooperAug 22, 2025
Why is the fabric not feeding through my Brother CS-100T Sewing Machine?
H
hayneswilliamAug 22, 2025
If the fabric does not feed through your Brother Sewing Machine, it could be due to:
* The feed dogs being lowered; slide the feed dog position lever to the correct position.
* The stitch being too fine; lengthen the stitch length.
* Using the wrong combination of fabric, thread, and needle; choose the appropriate combination.
* Thread tangled in the bobbin case; remove the tangled thread and clean the bobbin case.
J
Jacqueline JohnsonAug 25, 2025
Why does the needle keep breaking on my Brother CS-100T Sewing Machine?
P
Phillip CareyAug 26, 2025
If the needle on your Brother Sewing Machine breaks, consider the following:
* Ensure the needle is fitted properly.
* Tighten the needle clamp screw firmly with a screwdriver.
* Replace the needle if it is bent or blunt.
* Use the correct combination of fabric, thread, and needle.
* Attach the appropriate presser foot for the stitch type.
* Loosen the upper thread tension if it's too tight.
* Lightly guide the fabric instead of pulling it.
V
Vanessa WilliamsonAug 27, 2025
Why does the upper thread break on my Brother CS-100T?
K
Kathryn Mendoza PhDAug 28, 2025
If the upper thread keeps breaking on your Brother Sewing Machine, here are a few things to check:
* Make sure you've threaded the upper thread correctly.
* Remove any knots or tangles in the thread.
* Ensure the needle is appropriate for the thread you're using.
* Loosen the upper thread tension if it's too tight.
* Remove any tangled thread, especially from the bobbin case, and clean the bobbin case if necessary.
* Replace the needle if it's bent or blunt.
J
Jeffrey LopezAug 30, 2025
What to do if the lower thread is tangled in my Brother CS-100T Sewing Machine?
S
Sean BarnettAug 30, 2025
If the lower thread is tangling or breaking on your Brother Sewing Machine, try these solutions:
* Wind the bobbin thread properly.
* Replace the bobbin if it's scratched or doesn't turn smoothly.
* Remove any tangled thread and clean the bobbin case.
* Use only bobbins designed for your machine.
* Reset the bobbin thread correctly.
A
Amy GillSep 3, 2025
Why can't I use the needle threader on my Brother Sewing Machine?
M
Melanie SnyderSep 3, 2025
If the needle threader on your Brother Sewing Machine isn't working, make sure:
* You have moved the needle holder to its highest position by turning the handwheel toward you or by pressing the needle position button.
* You have inserted the needle properly.
K
Katrina BrownSep 6, 2025
What to do if the stitch is not sewn correctly on my Brother CS-100T Sewing Machine?
M
Maria WrightSep 6, 2025
If the stitch isn't sewn correctly on your Brother Sewing Machine, it might be because:
* The presser foot you're using isn't correct for the type of stitch; attach the correct presser foot.
* The thread tension is incorrect; adjust the tension of the upper thread.
* The thread is tangled, for example, in the bobbin case; remove the tangled thread and clean the bobbin case.
A
Andrew RojasSep 9, 2025
Why is the fabric wrinkled when I sew with my Brother CS-100T Sewing Machine?
T
Tamara PierceSep 9, 2025
If the fabric is wrinkling while using your Brother Sewing Machine, consider the following:
* Ensure you've threaded the upper thread and wound the bobbin thread correctly.
* Fit the spool properly.
* Use the right combination of fabric, thread, and needle.
* Replace the needle if it is bent or blunt.
* If sewing thin fabric, use a stabilizer material under the fabric.
* Adjust the tension of the upper thread.
T
travisfergusonSep 12, 2025
Why is my Brother Sewing Machine making a high pitched noise?
J
Jennifer AverySep 12, 2025
If you're hearing a high-pitched noise while sewing with your Brother Sewing Machine, it could be due to:
* Dust buildup in the feed dogs or bobbin case – clean the bobbin case.
* Incorrect upper threading – correct the upper threading.
* A scratched bobbin case – consider replacing it.
* Using the wrong bobbin – use only bobbins designed for your machine.
To Next Page
General
