Need help?Do you have a question about the Brother CS5055PRW and is the answer not in the manual?
General| Stitch Number | 50 |
|---|---|
| Needle Threader | Automatic |
| LCD Screen | Yes |
| Speed Control | Yes |
| Free Arm | Yes |
| Maximum Sewing Speed | 850 stitches per minute |
| Lighting | LED |
| Buttonhole Styles | 5 one-step |
| Included Accessories | needle set, bobbins, screwdriver, seam ripper, cleaning brush |
| Presser Feet | 7 included |
| Bobbin Type | Drop-in |
Explains the main mechanical parts of the sewing machine.
Describes the power transmission and movement mechanisms.
Details the location of various electronic parts within the machine.
Illustrates the interconnections of electronic control components.
Explains the function of individual electronic components.
Covers the disassembly and assembly of the machine's primary structural components.
Details procedures for handling electrical components and motors.
Focuses on the needle and presser mechanisms and upper shaft assembly.
Explains the disassembly and assembly of the fabric feeding system.
Covers the procedures for the bobbin winding mechanism.
Details specific disassembly and assembly steps for main components.
Provides detailed assembly steps for electrical parts and motors.
Specific assembly instructions for needle, presser, and upper shaft parts.
Detailed assembly procedures for the bobbin winder.
Explains the assembly of the feed and rotary components.
Step-by-step assembly for the needle-presser module.
Procedures for entering and controlling test modes for adjustments.
Instructions for adjusting the timing belt tension for optimal performance.
Guidelines for setting the correct motor belt tension.
Details on adjusting the upper thread tension for proper stitching.
Procedure to adjust needle drop for the left base line.
Steps to align the rotary hook unit correctly.
Adjusting the needle-to-hook clearance on both sides.
Adjusting the needle bar's upward travel position.
Setting the correct vertical position of the needle bar.
Adjusting clearance between needle tip and rotary hook.
Adjustment procedure for the automatic needle threader.
Adjusting presser bar height and ensuring parallelism.
Adjusting the feed dog's forward and backward movement.
Adjusting the bobbin winding mechanism for proper fill.
Setting the position of the buttonhole lever switch.
Adjusting the front/back position of needle and presser foot.
Aligning the feed dog's position.
Setting the correct height of the feed dog.
Adjusting the position of the inner rotary hook bracket.
Adjusting the tension of the lower thread in the rotary hook.
Lists error codes and their probable causes for electronic issues.
Troubleshooting steps for specific error messages shown on the display.
Diagnostic steps when the machine fails to power on.
Troubleshooting for pulse motors not returning to their starting point.
Steps to resolve issues with pattern selection.
Troubleshooting guide for when the main motor fails to spin.
Addresses problems with unstable or insufficient main motor speed.
Steps for diagnosing and fixing incorrect pattern stitching.
Troubleshooting for issues with sewing buttonholes.
Diagnosing problems with the machine's operation buttons.
Resolving issues related to foot controller operation.
Troubleshooting steps when bobbin winding fails.
Steps to diagnose why the LED lamp is not illuminating.
Troubleshooting for display issues on the LCD screen.
Steps to diagnose why the buzzer is not functioning.
Wiring instructions for the needle bar and presser mechanisms.
Details on correctly wiring the power supply unit.
Wiring procedures specific to the front cover components.
To Next Page
